Kangjie Zhichen Wheel Type Water Flow Meter
1. Applications:
Industrial flow monitoring, circulating cooling water flow measurement, non-potable water flow monitoring, flow monitoring after waste water treatment, agriculture and irrigation water treatment, water softening, filtration, valve nest system and multi-port valve system, other water flow monitoring and control.
2. Specifications:
3. Installation Notifications:
A,Because the flow sensor probe belongs to electronic products, the installation should be noted that the top of the probe should not have valves, flanges and other parts exposed to leakage of liquid to prevent the liquid from entering the sensor.
B,When installing the probe, try not to connect the signal line directly from the top to the bottom of the probe, so as to prevent the signal line from being contaminated with water droplets. The water droplets will flow along the signal line to the probe, which may damage the probe. Fold, and then up.
C,After the probe is installed, the user must install the sensor a simple waterproof cover with an impermeable material to prevent accidental drops of water entering into the probe and causing
damage.
D,In the process of cleaning equipment, the use of water and other washing probe is strictly prohibited, you can use dry or wring dry wiper.
E,Equipment installation maintenance, pay attention to the protection of the sensor, avoid contact with water.
4. Products/Company Show:
1. Applications:
Industrial flow monitoring, circulating cooling water flow measurement, non-potable water flow monitoring, flow monitoring after waste water treatment, agriculture and irrigation water treatment, water softening, filtration, valve nest system and multi-port valve system, other water flow monitoring and control.
2. Specifications:
Measurement Target | Liquid |
Range | 0-5 m/s |
Measurement Diameter | DN40 - DN100 |
Measurement Accuracy | ±4%, can work as a measuring instrument |
Power Supply | 5-24V/DC <20mA |
Signal Input | Continuous Pulse Square Wave Strong anti-interference Performance |
Max Transmission | 300m |
Impeller Material | PVDF |
3. Installation Notifications:
A,Because the flow sensor probe belongs to electronic products, the installation should be noted that the top of the probe should not have valves, flanges and other parts exposed to leakage of liquid to prevent the liquid from entering the sensor.
B,When installing the probe, try not to connect the signal line directly from the top to the bottom of the probe, so as to prevent the signal line from being contaminated with water droplets. The water droplets will flow along the signal line to the probe, which may damage the probe. Fold, and then up.
C,After the probe is installed, the user must install the sensor a simple waterproof cover with an impermeable material to prevent accidental drops of water entering into the probe and causing
damage.
D,In the process of cleaning equipment, the use of water and other washing probe is strictly prohibited, you can use dry or wring dry wiper.
E,Equipment installation maintenance, pay attention to the protection of the sensor, avoid contact with water.
4. Products/Company Show: